NEC NEAX1000IVS PN-4DITB, PN-DK00, PN-4DLCA, PN-4DLCM, PN-2DLCB, PN-2DLCN, PN-2DLCC, PN-4DLCD

	Table 2-6	Functional Outline of Line/Trunk Circuit Cards (Continued)
CARD NAME	FUNCTIONAL		FUNCTIONAL OUTLINE
	NAME
PN-4DITB	DIT		4-line Direct In-Dialing Trunk Card
			This card is equipped with the function for loop detection, sending reverse signal and
			PB to DP signal conversion. This card is internally equipped with –48 V DC On-Board
			Power supply.
PN-DK00	DK		Circuit card for External Relay Control/External Key Scan
			This card is provided with eight circuits, and can provide the above-mentioned control
			functions on a per circuit basis.
PN-4DLCA/	DLC		4-line Digital Line Circuit card for Multiline Terminal Series E/Elite/Series III/
PN-4DLCM			ElectraPro/DSS Console (–27 V Version, 2-wire type) Note
			This card is equipped with quick diagnostics to detect short line conditions and the
			normality (Synchronous/Asynchronous) of the terminal.
PN-2DLCB/	DLC		2-line Digital Line Circuit Card for Multiline Terminal Series E/Series III/DSS Console/
PN-2DLCN			DESKCON (–48V Version, 2-wire type) Note
			This card is equipped with quick diagnostics to detect short line conditions and
			normality (Synchronous/Asynchronous) of terminal. This card is internally equipped
			with a –48 V DC On-Board Power Supply.
PN-2DLCC	DLC		2-line Digital Line Circuit Card for Multiline Terminal Series II/SN610 Attendant
			Console (–48 V Version, 4-wire type) Note
			This card is equipped with quick diagnostics to detect short line conditions and the
			normality (Synchronous/Asynchronous) of the terminal. This card is internally
			equipped with –48 V On-Board Power Supply.
PN-4DLCD/	DLC		4-line Digital Line Circuit Card exclusively used for Multiline Terminal Series E/Series
PN-4DLCQ			III/DSS Console/DESKCON (–27 V Version, 2-wire type) Note
			This card is equipped with quick diagnostics to detect short line conditions and the
			normality (Synchronous/Asynchronous) of the terminal.
PN-4DLCF	DLC		4-line Digital Line Circuit Card for Multiline Terminal Series II/SN610 Attendant
			Console (–27 V Version, 4-wire type) Note
			This card is equipped with quick diagnostics to detect short line conditions.
PN-8DLCJ/	DLC		8-line Digital Line Circuit Card for Multiline Terminal Series E/Series III/DSS Console/
PN-8DLCP			DESKCON (–27 V Version, 2-wire type) Note
PN-2DPCB	DPC		2-line Data Port Controller Card
			This card is used for the intra-office or inter-office digital data transmission on fixed
			path connection. This card can accommodate a maximum of two DTE with V.11 (X.21)
			interface or V.24/V.28 (RS-232C) interface.
PN-2ILCA	ILC		2-line ISDN Line Circuit Card
			This card provides a physical interface to ISDN Terminals.
PN-4LCD-A	LC		4-line Analog Line Circuit Card for single line telephones
			Loop resistance: Max. 600 ohms
			This card is equipped with the function for controlling Message Waiting Lamp.
			Each 4 circuits are equipped with momentary open function.
			This card is equipped with quick diagnostics to detect short and open line conditions.
			This card is internally equipped with a +80 V DC-DC Power Supply circuit.

NDA-24219CHAPTER 2

Page 13

Revision 2.0