NEC NEAX1000IVS MDF Cable, From Cable Module Connection Number Destination, PIM0 LTC0 MDF, LTC1

NAP-200-006

Sheet 1/2

Cable Running to MDF

1. MDF CABLE

To facilitate the termination of the 25 pair cables (MDF cables) from the system to the MDF, the length of each cable to be used should be predetermined according to the distance between the MDF and the system. Each cable should be labeled at both ends using a cable number or cable designation as shown in Figure 006-1.

CHAMP CONNECTOR

TO PIM

TWISTED 25 PAIR CABLES

			TO MDF
		FROM			CABLE	TO	CABLE
	MODULE		CONNECTION		NUMBER		DESTINATION
	PIM0		LTC0	1		MDF	0 LTC0
			LTC1	2			0 LTC1
	PIM1		LTC0	3		MDF	1 LTC0
			LTC1	4			1 LTC1
			Figure 006-1 MDF Cable
CHAPTER 3					NDA-24219
Page 48
Revision 2.0