
Sheet 2/3
Mounting Circuit Cards
(3)Before mounting the circuit cards, confirm the following items.
•Wrist Strap is connected Frame Ground.
•Switch setting of circuit cards is already completed (Refer to the Circuit Card Manual).
•“SW1” switch of
(4)Mount circuit cards into their mounting positions according to the “Bay Face Layout” and “Port Assign- ment Table” given in the System Data Sheet.
Figure 009-2 shows the mounting method of circuit cards.
| TO FRAME GROUND CONNECTION |
| (SEE FIGURE |
| WRIST STRAP |
CARD CONTACT SIDE | CARD FRONT SIDE |
Figure | Mounting Circuit Cards |
CHAPTER 3 | |
Page 116 |
|
Revision 2.0 |
|