NEC NEAX1000IVS system manual Station Data, Trunk Data

1.2.2Station Data

In this table, the following data are required.

•Station Number: Station numbers (up to four digits), specified in the Numbering Plan Table, are assigned. For the Multiline Terminal station, specify the Primary Extension Number.

•Type of Telephone

The type of station telephone set is specified as shown below.

TYPE OF TEL		DESCRIPTION
DP	Dial Pulse Telephone set
PB	DTMF Telephone set
Multiline Terminal	Multiline Terminal set

•SERVICE CLASS-A/B/C

Specify the service class (1-15) programmed in the Service Restriction Data Table.

•RESTRICTION CLASS-DAY/NIGHT

Specify the Trunk Restriction Class as shown below.

1:Unrestricted

2:Non-Restricted-1

3:Non-Restricted-2

4:Semi-Restricted 1

5:Semi-Restricted 2

6:Restricted 1

7:Restricted 2

8:Fully-Restricted

•DIT TRUNK NUMBER

In the case of the DIT (Direct-In Termination) station, specify the trunk number connected.

1.2.3Trunk Data

In this table, the following data are required:

•ACCESS NUMBER

Specify the access code for the trunks.

•DESTINATION

Specify the distant office such as Central Office (Public Exchange), Tie Line, etc.

CHAPTER 4 NDA-24219

Page 130

Revision 2.0