Sheet 3/7
System Initialization and
System Data Entry
To reset CAT mode:
While “COMMAND =
(1)Lift the handset (off hook)
-SPKR lamp turns off.
(2)Restore the handset (on hook)
-CNF, ANS lamps turn off.
-LCD returns to clock.
The
2.2 MAT
In addition to the CAT mode programming, the MAT can also be used in the MAT mode. Refer to the MAT Opera- tion Guide and the Command Manual.
2.3 Feature Programming
This section provides the feature programming (Music On Hold, Push Button Calling) related to the internal PB Re- ceiver and internal TNT on the MP card. For the other feature programming, refer to the Feature Programming Man- ual.
In the programming procedure, the meaning of (1), (2) and marking are as follows:
(1): 1st Data
(2): 2nd Data
: Initial Data
With the system data clear command (CM00, CM01), the data with this marking ( 
) is automatically assigned for each command.
INITIAL : System Initialization
After entering the data, system initialization is required (Press SW1 on MP card).
CHAPTER 3 |
Page 120
Revision 2.0
