NEC NEAX1000IVS Switch Settings see Table, SW301, OFF SW102 Battery Start, Press MO, Mentarily

NAP-200-008

Sheet 7/10

Switch Setting of Circuit Card

(3) Switch Settings (see Table 008-6)

	Table 008-6	PZ-PW86 (PWR) Card Switch Settings
SWITCH NAME	SWITCH	SETTING	FUNCTION	CHECK
	NUMBER	POSITION
Mode (Piano Key SW)	1	OFF	Always set to OFF
		ON	Standard setting for equalize charging (set to
ON			equalize for Gel cell or no battery).
1	2		Float charging, for vented batteries only.
		OFF
2

SW1							ON	For turning AC power and the battery on
		ON (–)						For turning AC power and the battery off
		OFF (O)					OFF
SW102 BATTERY START								To start each PIM on battery power, when AC
							PRESS MO-	power is not provided
								(switch “SW” must be ON)
							MENTARILY
							UP	AC INPUT: 180 V - 264 V
	100/120 VAC
							DOWN	AC INPUT: 180 V - 264 V
			240 VAC
SW301							ON	CR Voltage: 75 Vrms
						1
20Hz					25Hz		OFF	CR Voltage: 90 Vrms
				2
ON					OFF
	1		ON	Frequency: 20 Hz
75V							90V	2
	OFF	Frequency: 25 Hz

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col- umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and , the setting of the switch varies with the system concerned.

NDA-24219CHAPTER 3

Page 111

Revision 2.0