NETGEAR FVS318G manual VPN Firewall VPN Connection Status and Logs

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual

VPN Firewall VPN Connection Status and Logs

To view VPN firewall VPN connection status, select VPN from the main menu and Connection Status from the submenu. The VPN Connection Status screen displays.

Figure 5-16

Note: The information in the VPN Connection Status screen in Figure 5-16does not correspond to the example configurations that are presented in this chapter.

You can set a Poll Interval (in seconds) to check the connection status of all active IKE policies to obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each active IPsec SA (security association):

•Policy Name. The name of the VPN policy associated with this SA.

•Endpoint. The IP address on the remote VPN endpoint.

•Tx (KBytes). The amount of data transmitted over this SA.

•Tx (Packets). The number of packets transmitted over this SA.

•State. The current state of the SA. Phase 1 is “Authentication phase” and Phase 2 is “Key Exchange phase”.

•Action. Allows you to terminate or build the SA (connection), if required.

5-14 Virtual Private Networking

v1.1, August 2010