NETGEAR FVS318G manual Configuring Mode Config Operation on the VPN Firewall

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual

Note: After configuring a Mode Config record, you must manually configure an IKE policy and select the newly-created Mode Config record from the Select Mode Config Record pull-down menu (see “Configuring Mode Config Operation on the VPN Firewall.” You do not need to make changes to any VPN policy.

Note: An IP address that is allocated to a VPN client is released only after the VPN client has gracefully disconnected or after the SA lifetime for the connection has timed out.

Configuring Mode Config Operation on the VPN Firewall

You need to configure two screens: the ModeConfig screen and the IKE Policies screen.

Configuring the Mode Config Screen

To configure the Mode Config screen:

1.Select VPN from the main menu and Mode Config from the submenu. The Mode Config screen displays.

Figure 5-32

2.Click Add. The Add Mode Config Record screen displays (see Figure 5-33 on page 5-46).

Virtual Private Networking 5-45

v1.1, August 2010