
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
The Connection Status window should show a valid IP address and gateway. If the configuration was not successful, skip ahead to “Manually Configuring Your Internet Connection following this section, or see “Troubleshooting the ISP Connection” on page
Note: If the configuration process was successful, you are connected to the Internet through the WAN port.
If your WAN ISP configuration was successful, you can skip ahead to “Manually Configuring Your Internet Connection” on page
Manually Configuring Your Internet Connection
If you know your ISP connection type, you can bypass the Auto Detect feature and connect your VPN firewall manually. Ensure that you have all of the relevant connection information such as IP addresses, account information, type of ISP connection, and so on, before you begin. Unless your ISP automatically assigns your configuration automatically via DHCP, you will need these configuration settings from your ISP.
To manually configure your broadband ISP settings:
1.Select Network Configuration from the main menu and Broadband ISP Settings from the submenu. The Broadband ISP Settings screen displays (see Figure
2.In the ISP Login section, choose one of these options:
•If your ISP requires an initial login to establish an Internet connection, click Yes (this is the default).
•If a login is not required, click No and ignore the Login and Password fields.
Figure
3.If you clicked Yes, enter the
Connecting the VPN Firewall to the Internet |