NETGEAR FVS318G manual Configuring LAN DMZ Rules

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual

Figure 4-5

4.Configure the settings based on the descriptions in Table 4-1 on page 4-3.

5.Click Apply. The new rule will appear in the Outbound Services table. The rule is automatically enabled.

The procedure to add a new DMZ WAN inbound service policy is similar to the procedure described above with the exception that you click Add under the Inbound Services table, you configure the settings based on the descriptions in Table 4-2 on page 4-6, and the policy is added to the Inbound Services table.

Configuring LAN DMZ Rules

The LAN DMZ Rules screen allows you to create rules that define the movement of traffic between the LAN and the DMZ. The Default Outbound and Inbound Policies is to allow all traffic between the local LAN and DMZ network. Firewall rules can then be applied to block specific types of traffic from either going out from the LAN to the DMZ (outbound) or coming in from the DMZ to the LAN (inbound).

Firewall Protection and Content Filtering 4-13

v1.1, August 2010