ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-34 Firewall Protection and Content Filtering
v1.1, August 2010
2. Check the Yes radio box in the MAC Filtering Enable section.
3. Select the action to be taken on outbound traffic from the listed MAC addresses:
• Block this list and permit all other MAC addresses.
• Permit this list and block all other MAC addresses.
4. Enter a MAC Address in the Add Source MAC Address checkbox and click Add. The MAC
address will appear in the MAC Addresses table. Repeat this process to add additional MAC
addresses.
A valid MAC address is six colon-separated pairs of hexadecimal digits (0 to 9 and a to f). For
example: 01:23:45:ab:cd:ef.
5. Click Reset to cancel a MAC address entry before adding it to the table or click Apply to save
your settings.
You can edit the MAC address by clicking Edit in the Action column adjacent to the MAC
Address.
To remove an entry from the table, select the MAC address entry and click Delete.
To select all the list of MAC addresses, click Select All. A checkmark will appear in the box to the
left of each MAC address in the MAC Addresses table.
Figure 4-22