ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Virtual Private Networking 5-51
v1.1, August 2010
2. From the left side of the menu, click My Identity.
Enter the following information:
a. Click Pre-Shared Key and enter the key you configured in the VPN firewall’s Add IKE
Policy screen
b. From the Select Certificate pull-down menu, select None.
c. From the ID Type pull-down menu, select Domain Name and create an identifier based
on the name of the IKE policy you created; for example “remote_id.com”.
d. Under Virtual Adapter pull-down menu, select Preferred. The Internal Network IP
Address should be 0.0.0.0.
e. Select your Internet Interface adapter from the Name pull-down menu.
3. On the left-side of the menu, select Security Policy.
Enter the following information:
a. Under Security Policy, Phase 1 Negotiation Mode, check the Aggressive Mode radio
button.
Figure 5-36
Note: If no box is displayed for Internal Network IP Address, go to Options/
Global Policy Settings, and check the box for “Allow to Specify Internal
Network Address.”