84 Chapter 7 Command Line Interface (CLI)
MFC directory
Table 25 includes the CLI commands for the configuration and control of
Table 25 MFC directory CLI commands (Sheet 1 of 3)
CLI command | Description |
|
|
ICm <mfc_link> | Sets and displays incoming call timers. |
<incoming_timer_type> <msec> |
|
| Where: |
| mfc_link is the number of required mfc/r2 links. |
| incoming_timer_type is one of the timers defined for incoming mfc call |
| processing. |
| msec is the time interval in msec. |
|
|
OGm <mfc_link> | Sets and displays outgoing call timers. |
<outgoing_timer_type> <msec> |
|
| Where: |
| mfc_link is the number of required mfc/r2 links. |
| outgoing_timer_type is one of the timers defined for outgoing mfc call |
| processing. |
| msec is the time interval in msec. |
|
|
REgSign <mfc_link><rs_name> | Sets the register signaling |
| Where: |
| mfc_link is the number of the link, 0 or 1. |
| rs_name is the signaling type, 0 (MFC) or 1 (SMFC). |
|
|
AniOption <mfc_link><flag> | Enables or disables the ANI option. |
| Where: |
| mfc_link is the number of the link, 0 or 1. |
| flag defines the ANI option as enabled (0) or disabled (1). |
| When disabled, ANI is not requested in incoming calls and not transmitted in |
| outgoing calls. |
|
|
mfcINDia<flag> | Enables or disables the processing of the special MFC option for India. |
| Where: |
| flag defines the Special ANI digit option as enabled (0) or disabled (1). |
| When enabled, the prefix of one is expected on incoming calls and is |
| transmitted on outgoing calls. |
|
|
