Northern UTA220/UTA220k manual Default 2,1,1, Enq

			AT Command Set
	Table C-1: UTA 220 AT Command Set (Continued)
Command	Description		Value
%L13=	Line feed insertion after	0	None
	carriage return	1	after <CR> to DTE
		2	after <CR> from DTE
		4	after echo of <CR>
		default (0,0,0)
%L14=	Padding after line feed	Range: 0-255default (0,0,0)
%L15=	Editing in Data Transfer	0	None
		1	Edit
%L16=	Character Delete	Range: 0-127default (8,127,127)
%L17=	Line Delete	Range: 0-127default (24,24,24)
%L18=	Line Display	Range: 0-127default (18,18,18)
%L19=	Editing PAD Service	0	None
	Signals	1	Printers
		2	Displays
		default (2,1,1)
%L20=	Echo Mask	0	None
		1	No echo of <CR>
		2	No echo of <LF>
		4	No echo of <VT>, <HT>,
		<FF>
		8	No echo of <BEL> and <BS>
		16	No echo of <ESC> and
		<ENQ>
		32	No echo of <ACK>, <NAK>,
			<STX>,<SOH>, <EOT>,
			<ETB>, <ETX>
		64	No echo of parameters 16,
		17,	and 18
		128	No echo of <NUL>, <SO>,
		<SI>,	<DLE>,<DC1>,
		<DC2>,<DC3>,
		<EM>,	<DC4>,<SYN>, <CAN>,
			<SUB>,<FS>, <GS>, <RS>,
			<US>
		default (248,0,0)
%L21=	Parity	0	None
		3	Use @P3
		default (0,0,0)
*Note: "by port" indicates that these switch parameters are associated with a
particular port. However, this does not exclude ports from sharing the same
SPID or TEI.+

UTA220/UTA220k C-13