Northern UTA220/UTA220k manual 5 Default X.3 Parameters, Remarks, D-Channel, Description

			D-Channel X.25
	Table 12-5:Default X.3 Parameters
Parameter	Description	Default	Remarks
1	PAD recall using a	1	DLE character (Ctrl P) is the
	character		PAD recall character
2	Echo	1	Enabled
3	Data forwarding	2	Carriage return character
	character selection		(0Dh) is the data forwarding
			character
4	Idle timer delay	0	Timer = 0 secs
	selection
5	Ancillary device	2	Flow control of local DTE
	control		device by PAD allowed in data
			transfer
6	Control of PAD	5	Transmit PAD command and
	service and		service signals in standard
	command signals		form
7	Action of PAD on	0	Do Nothing
	break from DTE
8	Discard output	0	Normal data delivery
9	Padding after	0	No padding after carriage
	carriage return		return
10	Line folding	0	No line folding
11	Binary speed of	-	Set by current baud rate
	DTE
12	Flow control of	1	DTE flow control of PAD
	PAD by DTE		allowed
13	Line feed insertion	5	Insert line feed after carriage
	after carriage		return transmitted to the DTE
	return		and after echo of carriage
			returns
14	Padding after line	0	No padding
	feed
15	Editing	1	Editing is allowed during data
			transfer
16	Character delete	8	Ctrl H (08H of ASCII Character
			Table) is the delete character
17	Line delete	24	Ctrl X (18H of ASCII Character
			Table) is the line delete
			character

UTA220/UTA220k 12-17