Northern UTA220/UTA220k manual Contents continued, AT Command Operation Continued, Rate Adaption

	Contents (continued)
Chapter 8. AT Command Operation (Continued)
BACKSPACE KEY	8-3
REPEATING A COMMAND: A/	8-3
NUMBERED COMMANDS	8-3
GROUP COMMANDS	8-3
COMMAND SCOPE	8-4
Supervisor Command Mode	8-4
Chapter 9. Rate Adaption
RATE ADAPTION	9-1
T-LINK	9-1
Flow Control and Pin Options	9-2
T-Link Options	9-2
V.120	9-3
V.120 Options	9-3
Chapter 10. BONDING
BONDING ON THE UTA220	10-1
PLACING A BONDING CALL	10-2
DISCONNECTING A BONDING CALL	10-2
Chapter 11. Synchronous Operation
SYNCHRONOUS MODES	11-1
Synchronous Mode 1: Sync Pause Mode	11-1
Synchronous Mode 2: Dial Stored Number Mode	11-1
Chapter 12. D-Channel X.25
FUNCTIONAL DESCRIPTION	12-1
X.25	12-1
PAD	12-1
ESTABLISHING AN X.25 SESSION	12-2
Initialize the PAD	12-2
ATDD Command	12-2
AT@P1=P or AT@P1=D Command	12-2
Establishing an X.25 Virtual Connection	12-3
Escaping to PAD Command Mode	12-4
Escaping to AT Command Mode	12-4
Disconnecting the X.25 Virtual Connection	12-4
COMMON APPARENT PROBLEMS	12-5
Parameter 1 Changed	12-5
Parameter 2 Changed	12-5
Parameter 5 Changed	12-5
Parameter 6 Changed	12-5
Parameter 20 Changed	12-5
PAD COMMAND SET	12-5
PAD Command Format	12-5

ix