Oki 4100 manual Safety, Installation Hints, Operation and Maintenance

4100 Fax ENGLISH 15/1/97 9:37 am Page 3

Safety

Installation Hints

■Install your fax machine in a dust-free location away from direct sunlight.

■Do not plug your fax machine into a power source shared by equipment which produces electrical noise (i.e., air conditioners, etc.).

■Leave electronic adjustments to authorized service personnel.

■The LINE terminal connects your fax machine to a standard telephone line. To avoid damage to your telephone system or to the fax machine, do not plug your fax machine into anything other than a stan- dard RJ-11C jack.

■Your fax machine is intended to be grounded electri- cally and is equipped with a three-wire grounded power cord. For your safety, do not attempt to defeat your power cord’s grounding plug.

■The socket-outlet should be installed near the equipment and should be easily accessible.

English

■ The TEL port on the back of the fax is only suitable for 2 wire devices. Not all standard telephones will respond to incoming ringing when connected to an extension socket.

■This equipment may not necessarily provide for the effective hand-over of a call from a telephone con- nected to the same line.

■The operation of this equipment on the same line as telephone or other equipment with audible warning devices or automatic ring detectors will rise to bell tinkle or noise and may cause false tripping of the ring detector. Should such problems occur, the user is not to contact the telephone company.

Operation and Maintenance

■Use a dry cloth to clean the control panel and the main body of the unit.

■Aside from the instructions specifically mentioned in this handbook, your fax machine is not user

Safety 3