
4100 Fax ENGLISH 15/1/97 9:38 am Page 73
The 2V level indicates the maximum impairment that may be introduced between the terminal apparatus and the Network Terminal Point (NTP) of a Relevant Branch system (RBS) containing the apparatus.
Only one OKIFAX 4100 should be connected between any series connected apparatus and the PSTN.
Difficulties may occasionally be experienced when making calls from other apparatus connected to the PSTN via the series apparatus. Such difficulties may include:
(i)Difficulty in making calls
(ii)Problems in telephone conversion being experi enced by both parties to the call
(iii)Such that any apparatus which forms part of the RBS or is connected via it, is so connected that no signals of any kind may be conveyed between that apparatus and a PSTN circuit or
Further information is contained in the proposed British Standard for RBS to PSTN lines.
TEL/FAX Change Over
When the OKIFAX 4100 is in changeover mode, care must be taken to ensure that you only connect the apparatus to tele- phone lines not listed in the telephone directories issued by the Public Telephone Network Operators.
The telephone number of this apparatus should not be issued to other parties without instructions concerning the correct method of making calls to this apparatus.
While operation may be possible initially, changes to or mod- ernisation of the network taking place in the normal course of events may result in the apparatus being connected to a net- work service with which it was not designed to be compati- ble. Failure of the apparatus to work under these circum- stances may not be the responsibility of the network operator.
If such difficulties are experienced, please consult your OKI- FAX supplier.
NOTE 2
A Relevant Branch system (RBS) is a telecommunication sys- tem other than a public telecommunication system that is:-
(i)Run under a license granted or having effect under section 7 of the Telecommunications Act 1984.
(ii)Connected to one or more PSTN lines.
Line Socket Installation (UK only)
To request the installation of a socket for the connection of your OKIFAX 4100 to the telephone network, you should send a postcard containing the following information to your local BT Sales Office:
1)The model no. of your fax machine: OKIFAX 4100
2)The approval no. of your fax machine: BABT/96/4334
3)The number of extension sockets you require.
4)Your name, address and telephone number.
The card should be signed and dated.
Note:If your wiring does not belong to British Telecom, then it is not necessary to apply to BT for socket installation.
Stat User Info 73