4100 Fax ENGLISH 15/1/97 9:37 am Page 49
11RING RESPONSE: This function controls how long your fax machine waits before answering an incoming telephone call. The available settings are 1 ring, 5 seconds, 10 seconds, 15 seconds or 20 seconds. The recommended setting for Tel/Fax mode is 1 ring.
12DISTINCTIVE RING: This function is intended for use only in certain countries outside Europe. The default setting is off, and should not be changed.
131’ST PAPER SIZE: This function allows you to tell your fax machine what size of paper you are using in your fax machine’s paper tray. Available settings are A4, letter, legal 13 and legal 14.
15USER LANGUAGE: This function allows you to switch between the two languages programmed into your fax machine.
16INCOMING RING: This function controls the telephone ringing sound your fax machine makes when a call comes in. When this function is set to off, your fax machine will not ring during incoming calls. When set to on, your fax machine will only ring when set to manual receive mode or RING RESPONSE is set to
17REMOTE RECEIVE: You may have manually answered and incoming call and had a conversation,
and then wish to receive a fax message from the other party before hanging up. Or, you may have picked up the telephone and heard a remote fax machine’s short beep every 3 seconds. This function enables you to activate your fax receive function using your telephone dial pad or the optional tele- phone handset. Using this feature you may press a single key twice on the telephone or handset key pad to start receiving. Available settings are off, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** AND ##.
18MEM./FEEDER SW.: This function controls how your fax machine normally transmits fax messages (by scanning the document into memory first, or by transmitting directly from the document feeder). Available settings are memory and feeder.
19POWER SAVE MODE: This function substantial- ly reduces the amount of power your fax machine consumes when it is not in use. When this function is on, your fax machine will automatically switch to power save mode after it has been idle for three minutes. When this occurs, your display will show:
POWER SAVE MODE, PRESS“START” TO EXIT.
While in this mode, your fax machine will automati- cally switch back to full operation after you press the Start key, when the telephone rings, when the telephone handset is lifted, or when a document is loaded. Available settings are on and off.
Programming 49
