Oki 4100 manual Remove the old image drum unit with its toner

4100 Fax ENGLISH 15/1/97 9:38 am Page 66

	3 Remove the old image drum unit (with its toner	unit by the ends. Never touch the surface of the green
English	cartridge), wrap it in the packaging materials from	drum inside the image drum unit.
	your new image drum unit, and throw it away.	5 Ensure that the tabs on both sides of the image
		drum are inserted correctly as shown below. Then
		press down firmly on both ends of the image drum
		until it snaps into place.

4 Insert the new image drum unit into your fax machine.

Warning: Never expose the image drum unit to light for more than 5 minutes. Never expose the image drum unit to direct sunlight. Always hold the image drum

66Problem Solving

6Install a new toner cartridge. Follow Steps 4-9 in Replacing the Toner Cartridge in this chapter.

7Wait until the time and answering mode appear on the display. Then press the Select Function key.

8Press the 7/Counter Display One Touch key. The display will show DRUM COUNT.

9Press the Yes ◀ key to clear the image drum unit counter.

10Press the Select Function key to finish.