4100 Fax ENGLISH 15/1/97 9:37 am Page 27
show 4:SYSTEM DATA PRG.
4Press the Yes ◀ key. The display will show NO=<TSI/CSI>, ID=<SENDER ID>.
5After the display clears, enter the full telephone number of your fax machine using the numeric keypad.
Tip: Use the Hyphen key to enter a “+” character before the number, and use the Space One Touch key to enter spaces.
6Press the Start key to save your entry.
7Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.
To Do This | Use |
Enter numbers | Numeric keypad |
Enter spaces | Space One Touch key |
Enter hyphens | Hyphen key |
Enter alphabet characters | Locate the character you want on the |
| numeric keypad. Press that key repeatedly |
| until the character appears. |
Enter a unique character. | Press the 0/Unique key repeatedly until |
| the character you want appears. The |
| following characters are available: |
| ! # & ‘ ( ) * + , |
| ü Æ Å Ø æ å ø. |
Enter two letters using | Press the No ♣ key to move to the |
the same key. | next character. |
Move the cursor to | Yes ◀ and No ♣ keys. |
make corrections.
8Press the Start key to save your entry. The display will show NO=<CALL BACK NO.>.
9After the display clears, use the numeric keypad to enter the telephone number you want to use for call back messages. Enter up to 20 characters.
Tip: Use the Hyphen key to enter a “+” character before the number, and use the Space One Touch key to enter spaces.
10Press the Start key to save your entry.
11Press the Select Function key to finish.
Setting Language
Your fax machine comes with two languages installed, which appear on the display and in reports. Follow the instructions below to switch languages.
Tip: Your dealer may be able to provide you with additional languages.
1Press the Select Function key.
2Press the 9/User Program One Touch key. The display will show 1:FUNC. PROGRAMMING.
3Press the Yes ◀ key. The display will show FUNCTION NO. [ ].
Installation 27
