Oki 6100 manual Correct Paper Storage, Do not stack partial reams of paper

Oki B6100 User Guide

Selecting Print Media

7-15

Correct Paper Storage

It is important to store paper correctly prior to placing it in the printer, since improper storage can cause frequent paper jams and poor print quality. Use the following guidelines when storing paper for use in the printer:

■Store reams of paper on a flat surface, and always store them stacked horizontally.

■Store reams of paper in an area away from both direct sunlight and high humidity

■Open sealed reams only when you are ready to load the paper into the paper tray, and always close and seal partial reams of paper.

■Do not stack partial reams of paper

Print Media Weight, Type, and Size

The 550 sheet feeder has paper guides that allow you to accommodate paper with the following dimensions:

•Paper Width

Minium: 3.87 inches (98.4 millimeters)

Maximum: 8.5 inches (215.9 millimeters)

•Paper Length

Minium: 5.85 inches (148.5 millimeters)

Maximum: 14 inches (355.6 millimeters)

The following table defines print media that you can use in the 550 sheet feeder paper tray, and also indicates the feed orientation—long edge feed (LEF) or short edge feed (SEF). If you have concerns about a specific brand or type of media, try samples of the media to determine if the resulting printer performance and print quality meet your expectations.

Paper Source	Weight	Paper Type and Feed	Paper Sizes
		Direction	Accommodated
Universal A4/Letter/	55-134 kg	A4 SEF	297 x 210mm
Ledger Paper Tray	16 to 24 lbs.		11.7 x 8.27 inches
(main tray and optional	60 to 216g/m2
		Letter SEF	279.4 x 215.9mm
550 sheet A4/Letter/
			11 x 8.5 inches
Ledger paper feeder)
		Legal 13" SEF	330.2 x 215.9mm
			13 x 8.5 inches
		Legal 14" SEF	355.6 x 215.9mm
			14 x 8.5 inches
		Executive SEF	266.7 x 184.5mm
			10.5 x 7.26 inches
		B5 SEF	257 x 182mm
			10.1 x 7.2 inches
		A5 SEF	210 x 149mm
			8.27 x 5.9 inches

Oct 02