9-4 Oki B6100 User Guide

Installing the Offset Catch Tray

Installing the Offset Catch Tray

NOTE: The printer automatically recognizes an option after the option is installed. The printer driver does not. You must enable (activate) the option in the printer driver after the option is installed.

The steps you will follow vary according to both your operating system and your installed printer driver. Here are the general steps you will follow.

Select the driver you want to work with.

Locate the printer properties section within the printer driver. Use the pulldown window to select the option.

Activate the option.

Before installing the offset catch tray, remove it from its packaging and verify that you have received an offset catch tray and that it is in good condition. If any part of the offset catch tray is missing or damaged, contact your dealer.

Throughout this procedure, the different sides of the printer are referred to as front, rear, left, and right. The front of the printer is the side that holds the control panel. The left and right sides are those to the left and right, respectively, of a person facing the front of the printer.

Oct 02

Page 186
Image 186
Oki 6100 manual Installing the Offset Catch Tray