Oki B6100 User Guide
PS Menu
PS Menu
NOTE: Settings in your software application will override any settings in your printer driver.
Your printer driver settings will override any settings from the printer menu or printer front panel.
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the PS Menu:
1.Press the MENU button on the control panel.
2.Press the NEXT button until the text “PS Menu” is shown on the second line of the dis- play.
3.Press the SELECT button to enter the PS menu.
4.Press the NEXT button to move through the submenus: Print PS Errors, and Manual
Feed TO.
5.Press the SELECT button to enter a submenu.
6.Use the procedures in the following table to access and change the PostScript settings:
Submenus | Default | Available Settings | Procedure for Changing Settings | |
| Setting |
|
|
|
|
|
|
|
|
Print PS Errors | Off | On | 1. | Press NEXT or PREVIOUS to toggle between ON |
This submenu allows you |
| Off |
| (print) and OFF (do not print). |
to choose to either print or |
|
| 2. | Press SELECT to save this setting. |
not print PS errors. |
|
|
|
|
|
|
|
|
|
Manual Feed TO | 0 | 0 - 99999 | 1. | Press NEXT or PREVIOUS to increase or |
This submenu allows you |
|
|
| decrease each digit of the |
to set the manual feed |
|
| 2. | Press SELECT to move to the next number. |
|
| 3. | Press SELECT after setting the last digit to save | |
seconds the printer should |
|
|
| the setting. |
wait for a manual feed. A |
|
|
|
|
setting of 0 will cause |
|
|
|
|
printer to wait indefinitely |
|
|
|
|
for a manual feed. |
|
|
|
|
|
|
|
|
|
