Oki B6100 User Guide
Installing the Offset Catch Tray
Use the following procedure to install the offset catch tray:
1.Remove any cardboard inserts or packing tape from the interior and exterior of the offset catch tray.
2.Turn the printer off by pressing [ O ] on the power switch on the front left of the printer, and disconnect the power cord from the AC outlet.
NOTE: Installing the offset catch tray while the printer is on may damage the printer or the offset catch tray.
3.Squeeze the latch on the top left of the rear cover to release the cover, then open the rear cover by pulling down on the top of the cover.
