9-14 Oki B6100 User Guide
Solving Offset Catch Tray Problems
Correcting Miscellaneous Offset Catch Tray Problems
Some offset catch tray problems may not cause an error message and may not interfere with the operation of the printer. If you are experiencing one of the problems listed below and there is no error message shown on the control panel display, refer to the procedures in the following sec- tions to check the possible causes of the specific problem.
■Inoperative offset catch tray
■Erratic operation
■Unusual noise
NOTE: The printer automatically recognizes an option after the option is installed. The printer driver does not. You must enable (activate) the option in the printer driver after the option is installed.
The steps you will follow vary according to both your operating system and your installed printer driver. Here are the general steps you will follow.
Select the driver you want to work with.
Locate the printer properties section within the printer driver. Use the pulldown window to select the option.
Activate the option.
