Omron CJ1W-ETN21 Settings Required for the Mail Send Function, Transferring the settings data

Using the Mail Send Function				Section 2-4
		become effective. Verify that it is safe for the Ethernet Unit to restart before
		transferring the settings data.
2-4-2	Settings Required for the Mail Send Function
		The following Unit settings must be made when using the Mail Send Function.
CX-		Setting	Setting requirement	Reference
Programmer
Unit Setup
Tab
SMTP		Server specification	Required.	1-4 Common
		type		Protocol Settings
		IP Address	One or the other is required, depending on the Server specifi-
			cation type setting.
		Host name
		Port No.	Rarely required (when a setting other than the default setting of
			25 is required).
		Local mail address	Required.
		Use POP before	Required when the account must be authenticated with POP3
		SMTP	before sending mail.
POP		Server specification	Required.
(See note 1.)		type
		IP Address	One or the other is required, depending on the server specifica-
			tion method setting.
		Host name
		Port No.	Rarely required (when a setting other than the default setting of
			110 is required).
		Account Name	Required when the account name is different from the name up
			to the @ symbol in the e-mail address.
		Mail password	Required.
		Server access inter-	Optional (Change when the default setting of 5 minutes is unac-
		val time	ceptable.)
DNS		IP Address	Required.
(See note 2.)
		Port No.	Rarely required (when a setting other than the default setting of
			53 is required).
		Retry timer	Optional (Change when the default setting of 10 seconds is
			unacceptable.)
Mail Address		Mail address 1	At least one e-mail address must be entered (mail address 1 or	page 21
			2).
		Mail address 2

19