
Using the FTP Server Function | Section |
•If a login name is not set or contains illegal characters, the default login name, CONFIDENTIAL, must be used. No password is required and any password that is set will be ignored.
FTP File Transfer Mode
FTP has two file transfer modes: ASCII mode and binary mode. Before start- ing to transfer files, use the type command (specifies the data type of transferred files) to select the required mode.
Always select binary mode for binary files (extensions .IOM, .STD, or .OBJ) in the
4-3 Using the FTP Server Function
4-3-1 Procedure
1.Make the basic settings.
Refer to SECTION 2 Installation and Initial Setup in the Operation Manual, Construction of Networks (W420).
↓
2.When using a
With the
↓
3.Select Transfer to PLC from the Options Menu and click the Yes Button. The setting data will be transferred to the CPU Bus Unit System Setup Area in the CPU Unit.
↓
4.When reading from and writing to the Memory Card: Mount the Memory Card into the CPU Unit.
↓
5.Connect the Ethernet Unit using the FTP client software.
↓
6.Enter the FTP login name and password set in the Unit Setup and log into the Ethernet Unit.
Note: Once logged in, the ftp commands can be used, such as cd (Change Directory), and get (Obtain File).
↓
7.Search in the following directories for the required file in the Memory Card mounted to the CPU Unit or the EM File Memory.
File memory type: Directory
Memory Card: \MEMCARD
EM File Memory: \EM
↓
8.Download the files.
↓
9.Exit the connection.
Note The Ethernet Unit will be restarted when the settings data is transferred to the CPU Bus Unit System Setup Area, so that the new settings are read and
70