Omron CJ1W-ETN21 Send Mail Condition Settings, Mail Address Specification Required

Using the Mail Send Function			Section 2-4
Send Mail Condition Settings
	Item	Contents	Default
	Trigger No.	Select a number as the trigger condition for	None
		sending mail. Up to eight trigger numbers can be
		registered.
	Send mail upon	Sets whether or not the selected mail trigger is	Not selected
	trigger	to be enabled.
Mail Address Specification (Required)
	Item	Contents	Default
	Mail address	Select whether the e-mail will be sent to destina-	Address 1
		tion mail address 1 or destination mail address
		2.

Data Sent by Mail (When Required)

■Data Sent in E-mail Body

Select whether the user-set ASCII information, Ethernet Unit's error log, and/ or Ethernet Unit's status information will be sent in the e-mail body.

Item	Contents	Default
Send user data	If this option is selected, user-created data is	Not selected
	sent in the body of the mail.
User-defined	When the Send user data Option is selected	Area: CIO
mail address	(enabled), this address specifies the leading I/O	Address: 0
	memory address where the user-set ASCII data
	is stored.
	Up to 1,024 bytes of data can be stored at this
	address and sent in the e-mail. The data will be
	sent up to the first null code character (00 Hex)
	in the user-set data, so if there is a null code
	character in the data the e-mail data will end at
	that point.
	In addition, the user-set data will be sent as-is
	and codes will not be converted.
Send Error Log	Selects whether or not the Ethernet Unit's error	Not selected
information	log will be included in the body of the e-mail.
Send status	Selects whether or not status information will be	Not selected
information	included in the body of the e-mail.

■Data Sent in an Attached File

These settings specify whether a file will be attached to the e-mail as well as the contents of the attached file if one is being attached.

Item	Contents	Default
Send file data or	This option selects whether or not a file will be	Not selected
I/O memory	attached to the e-mail.
data
Attached file	Select one of the following file types.	File data
type	• I/O data (.IOM)
	• I/O data (.TXT)
	• I/O data (.CSV)
	• File data (any file in file memory)
IO memory data	If an I/O data file (.IOM, .TXT, or .CSV) is	Area: CIO
	selected as the attached file type, this setting	Address: 0
	specifies the leading address where the data is	Size: 1
	stored and the number of words of data that the
	Ethernet Unit will convert to a file.

22