Parts and their functions

54 3 2 1

COARSE FINE

H

CHROMA

HUE

SET UP

VIDEO

SC

 

LEVEL

 

 

LEVEL

SYSTEM

 

 

 

VTR1 controls (side panel)

Encoder control area (VTR1)

Encoder and systems adjustments can be performed using these controls for the video signals to be output to an external device.

<Note>

The VTR2 controls are positioned symmetrically to the VTR1 controls.

1VIDEO LEVEL control

Used to adjust the video level of the video output signals.

2SET UP control

Used to adjust the setup level of the video output signals.

3HUE control

Used to adjust the hue of the video output signals.

4CHROMA LEVEL control

Used to adjust the chroma level of the video output signals.

5SYSTEM controls

Used to perform the system adjustments when a reference video signal is to be input for synchronization purposes.

H:Used to adjust the system’s horizontal phase (in subcarrier cycle increments).

SC FINE:

Used to adjust the system’s subcarrier phase.

(It is capable of 90-degree P-P continuous adjustments.)

SC COARSE:

Used to adjust the system’s subcarrier phase.

(It has 4 positions, each of which corresponds to

90degrees.)

<Note>

It may not be possible to adjust the phase in the 625i mode even when the system adjustments at the VTR1 side are performed.

23