Panasonic AJ-B95 INTERFACE menu

Setup menus

INTERFACE menu

	Item		Setting		V	V
				Description of setting	T	T
	Superimposed		Superimposed
No.		No.			R	R
	display		display		1	2
202	ID SEL			This selects the ID information to be returned to the controller.
		0000	OTHER	0: 20 25H (525i mode) is returned.
		0001	DVCPRO	1: The DVCPRO’s own ID and F0 33H (525i mode) is returned.	[	[
				<Note>
				This operation is not performed in the 625i mode.
205	BAUD RATE	0000	1200	This selects the RS-232C (EDL) transfer (baud) rate.
		0001	2400
		0002	4800			[
		0003	9600
		0004	19200
206	DATA LENGTH			This selects the RS-232C (EDL) data length.
		0000	7	0: 7 bits		[
		0001	8	1: 8 bits
207	STOP BIT			This selects the RS-232C (EDL) stop bit.
		0000	1	0: 1 bit		[
		0001	2	1: 2 bits
208	PARITY			This selects the RS-232C (EDL) parity.
		0000	NON	0: Parity bit is not used.		[
		0001	ODD	1: Parity bit is used with odd parity.
		0002	EVEN	2: Parity bit is used with even parity.
270	FLOW CONTROL			This selects the RS-232C (EDL) communication flow control.
		0000	NONE	0: No flow control using RTS/CTS.		[
		0001	RTSCTS	1: Flow control using RTS/CTS.
271	EDL FORMAT			This selects the format in which the EDL is to be dumped.
		0000	AGA850	0: Format which is common with Panasonic’s AG-A850.		[
		0001	CMX340	1: Format which is common with the CMX340 editing system.

The underlining indicates the factory setting.

35