Panasonic AJ-B95 TIME CODE menu

Setup menus

TIME CODE menu

	Item		Setting		V	V
				Description of setting	T	T
	Superimposed		Superimposed
No.		No.			R	R
	display		display		1	2
500	VITC BLANK			This selects whether to output the VITC signal at the positions
				which have been set by setup menu item No.501 (VITC POS-1)
				and No.502 (VITC POS-2).	[	[
		0000	BLANK	0: The VITC signal is not output.
		0001	THRU	1: The VITC signal is output.
501	VITC POS-1	0000	10L	This selects the position where the VITC signal is inserted.
	(525i mode)			<Note>
		0006	16L	The same line as the one selected by setup menu item No.502
				(VITC POS-2) cannot be set.
		0010	20L		[	[
	(625i mode)	0000	7L
		0004	11L
		0015	22L
502	VITC POS-2	0000	10L	This selects the position where the VITC signal is inserted.
	(525i mode)			<Note>
		0008	18L	The same line as the one selected by setup menu item No.501
				(VITC POS-1) cannot be set.
		0010	20L		[	[
	(625i mode)	0000	7L
		0006	13L
		0015	22L
503	TCG REGEN			This selects the signal to be regenerated when the TCG (time
				code generator) is in the regeneration mode.
		0000	TC&UB	0: Both the time code and user’s bit are regenerated.	[	[
		0001	TC	1: Only the time code is regenerated.
		0002	UB	2: Only the user’s bit is regenerated.
504	REGEN MODE			This selects when the time code is to be regenerated during
				automatic editing (assemble editing or insert editing).
		0000	AS&IN	0: The time code is regenerated in assemble editing or insert
				editing.		[
		0001	ASSEM	1: The time code is regenerated in assemble editing.
		0002	INSRT	2: The time code is regenerated in insert editing.
		0003	SW	3: The time code regeneration accords with the REGEN/PRESET
				switch position.

The underlining indicates the factory setting.

41