Panasonic AJ-B95 manual 37

Setup menus

EDIT menu

	Item		Setting		V	V
				Description of setting	T	T
	Superimposed		Superimposed
No.		No.			R	R
	display		display		1	2
311	AUD EDIT IN			This selects how to join audio edit IN points.
		0000	CUT	0: Cut editing		[
		0001	FADE	1: Fade editing
312	AUD EDIT OUT			This selects how to join audio edit OUT points.
		0000	CUT	0: Cut editing		[
		0001	FADE	1: Fade editing
313	AUTO ENTRY			This selects whether a previous edit OUT point is to be registered
				automatically in the setting as the next edit IN point after
				automatic editing.
		0000	OFF	0: No automatic setting		[
		0001	REC1	1: Automatic setting for VTR2 only
		0002	REC2	2: Automatic setting for VTR2 only (with compensation of –12
				frames)
		0003	ALL	3: Automatic setting for VTR1 and VTR2
315	AFTER CUE-UP			This selects the unit’s mode to be established upon completion of
				the cue-up operation.
		0000	STOP	0: The unit is set to the stop mode.		[
		0001	STILL	1: The unit is set to the still-picture (SHTL + 0.0, JOG STILL)
				mode.
317	AUD MEM MODE			This selects whether voice-over editing or audio cross-channel
				editing is to be performed using the internal audio memory.
		0000	OFF	0: No voice-over editing or audio cross-channel editing is		[
				performed.
		0001	INT_X	1: Audio cross-channel editing is performed.
		0002	INT_VO	2: Voice-over editing is performed.
318	AUD MEM CH			This selects the channel for which the voice-over editing or audio
				cross-channel editing is to be performed.
		0000	CH1	0: Editing in channel 1		[
		0001	CH2	1: Editing in channel 2
		0002	CH3	2: Editing in channel 3
		0003	CH4	3: Editing in channel 4
325	POSTROLL TM	0000	0.5s	This selects the postroll time (in 1-second increments).
		0001	1s			[
		0002	2s
		0003	3s

The underlining indicates the factory setting.

37