Panasonic AJ-B95 manual 67

Audio cross channel editing

Process 2

1 Press the A1 button and turn off its lamp. The A2 button LED remains lighted.

(CH1 audio insert is released and only CH2 audio insert editing is performed.)

2 Set the edit points of VTR1 and VTR2.

3 Operate the audio mixer in such a way that the VTR1 output signals (which are supplied to INPUT A of the audio mixer) are output from the MIXER CH1 OUT connector and the VTR2 CH1 output signals (input to INPUT B of the audio mixer) are output from the MIXER CH2 OUT connector.

	INPUT				MIXER
	A				CH1 OUT
	INPUT				MIXER
	B				CH2 OUT
		Audio mixer
AUDIO OUT				AUDIO		AUDIO	AUDIO
(CH1 or CH2)				CH1 OUT		CH2 IN	CH1 IN
				Internal
				memory
	VTR1				VTR2
			AJ-LT95

4 Press the AUTO EDIT button to execute editing.

When edit recording is initiated at the IN point, operate the audio mixer to gradually change the MIXER CH2 OUT output from the CH1 output signals of VTR2 (internal memory output, audio mixer INPUT B input) to the output signals of VTR1 (audio mixer INPUT B input). (This operation is called cross-fading.)

INPUT		MIXER	INPUT		MIXER
A		CH1 OUT	A		CH1 OUT
INPUT		MIXER	INPUT		MIXER
B		CH2 OUT	B		CH2 OUT
	Audio mixer			Audio mixer

Cross-fading

INPUT	MIXER
A	CH1 OUT
INPUT	MIXER
B	CH2 OUT

Audio mixer

67