Panasonic AJ-B95 manual 48

Setup menus

AUDIO menu

	Item		Setting		V	V
				Description of setting	T	T
	Superimposed		Superimposed
No.		No.			R	R
	display		display		1	2
714	EMPHASIS	0000	OFF	This selects emphasis for the audio signals.	[	[
		0001	ON
726	REC CUE			This selects the input signals to be recorded on the cue track.
		0000	CH1	0: Audio CH1 input signals
		0001	CH2	1: Audio CH2 input signals
		0002	CH1+2	2: Audio CH1 and CH2 mixed signals	[	[
		0003	CH3	3: Audio CH3 input signals
		0004	CH4	4: Audio CH4 input signals
		0005	CH3+4	5: Audio CH3 and CH4 mixed signals
727	PB FADE			This selects the audio edit point (IN and OUT) processing during
				playback.
		0000	AUTO	0: The processing complies with the status set for recording.	[	[
		0001	CUT	1: Cut processing is forcibly initiated.
		0002	FADE	2: Fade processing is forcibly initiated.
728	EMBEDDED AUD			This selects whether to embed the audio data in the serial output.
		0000	OFF	0: The audio data is not embedded.		[
		0001	ON	1: The audio data is embedded.
731	CUE OUT SEL			This selects whether the cue audio signal is to be output to the
				main system output in the search mode.	[	[
		0000	OFF	0: The cue audio signal is not output.
		0001	ON	1: The cue audio signal is output.
732	CUE SLOW			This selects the tape travel mode (cue track playback mode)
				during slow playback.
		0000	STEP	0: The output pictures are given priority, and step feed is
				performed.
		0001	LINEAR	1: Cue track playback is given priority, and the tape travels in the
				linear mode.	[	[
				<Notes>
				When “1: LINEAR” has been set:
				OSet the TC/CTL switch to TC. The CTL counter may not
				operate properly.
				OThe picture may not appear as clearly as in the step mode.

The underlining indicates the factory setting.

48