Panasonic AJ-B95 SYSTEM menu

Setup menus

SYSTEM menu

	Item		Setting		V	V
				Description of setting	T	T
	Superimposed		Superimposed
No.		No.			R	R
	display		display		1	2
11	SYS SC	0000	–127	This is for adjusting the system phase. The total variable range is
				at least ±180 degrees.
		0127	0	–: The phase is advanced.	[	[
				+: The phase is delayed.
		0255	128
13	VIDEO PHASE	0000	–32	This is for adjusting the video signal phase (in 148 ns steps).
				–: The phase is advanced.
		0032	0	+: The phase is delayed.	[	[
		0064	32
16	AV PHASE	0000	–90	This is for adjusting the phase of the audio output with respect to
				the video output signals (in 20.8 µs steps).
		0090	0	–: The audio output phase is advanced ahead of the video output.	[	[
				+: The audio output phase is delayed from the video output.
		0180	90
17	SYS H RANGE			This selects the SYSTEM H variable range.
		0000	FULL	0: ±8 µs	[	[
		0001	FINE	1: –2.0 µs to +2.7 µs
18	SYS H OFFSET			This selects the SYSTEM H center position.
		0000	–3	0: –13.4 µs
		0001	–2	1: –8.96 µs
		0002	–1	2: –4.52 µs	[	[
		0003	0	3: 0 µs
		0004	1	4: +4.52 µs
		0005	2	5: +8.96 µs
		0006	3	6: +13.4 µs
30	MENU LOCK			This selects the setup menu lock mode.
		0000	OFF	0: The lock is released (enabling changes to be made).		[
		0001	ON	1: The lock is engaged (prohibiting changes).
70	P.ON LOAD			This is for establishing the setting that changes the setup menu
				settings to the user’s initial settings when the power is turned on.		[
		0000	OFF	0: The setup menu settings remain unchanged.
		0001	ON	1: The setup menu settings are changed.

The underlining indicates the factory setting.

31