Setting the time code (T SET)

When performing assemble editing or time code insert editing by presetting the user’s bit

1 Align the cursor with setup menu item No.574 (UB PRESET).

2 Press the T SET ([SHIFT] + [3]) button.

3 Use the numeric input buttons to input the desired user’s bit value.

4 Press the ENTER button.

5 Select “SW” as the setup menu item No.504 (REGEN MODE).

6 Set the TC generator switch of VTR2 to R-RUN or F-RUN.

7 Proceed with the assemble editing or time code insert editing.

<Note>

To input letters A through F, press the SHIFT button and one of the following number buttons.

A ([SHIFT] + [1])

B ([SHIFT] + [2])

C ([SHIFT] + [3])

D ([SHIFT] + [4])

E ([SHIFT] + [5])

F ([SHIFT] + [6])

76