Panasonic DP-3000, DP-2000 manual Ledger

Installation and Configuration (Windows 2000)

Binding Margin

Select for ensuring the binding margin upon duplex printing.

Specifying On for Binding moves a printing area vertically or horizontally (for ensuring binding margin). For specifying a margin in consideration of a double-page spread printing on application, specify Off for Binding. Width of binding margin is specified on the main unit. (See page 30, copy section)

Staple

Specifying staple printing is allowed if the output bin is set to outer.

Note 1) Staple printing is allowed only with the Electronic Sorting Board (DA-ES200 : For DP-2000 only) and 1-Bin Finisher (DA-FS200) mounted.

Note 2) Paper is stapled at the top left or at the top right. (See table below.)

Document orientation	Paper orientation	Stapling position
	Top left
	Letter	Letter
	A4	A4
Letter		Top right
A4
		Letter
	Letter/A4	A4
	Note)	Stapling on Invoice/B5 sheet is not
		allowed.
		Top right
	Letter	Letter/A4
	A4

Letter/A4 Top left

	Letter/A4	Letter/A4
	Note)	Stapling on Invoice/B5 sheet is not
		allowed.
		Top right
		Ledger
Ledger		Legal
		A3
Legal
		FLS
A3
		B4
FLS
B4	Note)	Stapling on Invoice/B5 sheet is not
	Ledger/Legal/	allowed.
	A3/FLS/B4
	Top left
		Ledger/Legal/
Ledger/Legal/		A3/FLS/B4
A3/FLS/B4

Note) Stapling on Invoice/B5 sheet is not allowed.

Printer Section

71