Installation and Configuration (Windows 2000)

Duplex Unit

Check this checkbox if an optional duplex printing unit (DA-MD200) is installed. Duplex printing function is now enabled.

Output Tray

If the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select Inner Tray option. This allows specifying Inner 1 and Inner 2 as the output tray for the printer output.

If the 1-Bin Finisher or Exit Tray (Outer) (DA-FS200/XT200) is installed, select Inner Tray option + Finisher/Outer Tray option. This allows specifying Inner 1, Inner 2, and Outer as output tray for the printer output. Also, the stapling function becomes available if the Inner Tray option and Finisher/Outer option are enabled.

Number of Paper Tray

Select the number of available paper tray(s) for the printer if an optional Paper Feed Module is installed.

Printer/Fax Memory

Select the size of the Expansion Flash Memory Card or whether a Fax Option (2MB) has been installed, to enable Security Print.

Security Print Password

Set the password for Security Print.

NOTE

Device Settings Tab specifies device-specific settings and settings of optional

 

devices. Refer to operation manuals of the optional devices, or on-line manuals for

 

settings items.

Settings specified in this section are saved as standard (default) settings of the printer.

Printer Section

65

Page 65
Image 65
Panasonic DP-3000, DP-2000 manual Duplex Unit, Security Print Password