Panasonic DP-2000, DP-3000 manual Secure Print, Halftone Color Adjustment

Installation and Configuration (Windows NT 4.0)

Output Tray

Specify the output destination.

Note 1) Output Tray selection is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit, Exit Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.

Note 2) Post cards cannot be output from the outer tray.

Secure Print

Select to enable Security Print.

Halftone Color Adjustment

•Contrast

Adjust the contrast of print images.

•Brightness

Adjust the brightness of print images.

•Dark Picture

Select this option in order to print dark images brighter.

•Negative

Select this option in order to print images with black and white reversed.

•Input RGB Gamma

Adjust the gamma of print images (color intensities). Red, Green and Blue can also be adjusted individually.

•Black Ref/White Ref

Adjust the difference between the darkest and lightest colors of an image. Increasing the Black Ref value or decreasing the White Ref value will intensify the contrast of the image but reduces the range of colors in between.

•Picture

Select a test pattern type.

Selecting the View check box will display halftone adjustment results in the test pattern.

NOTE • Settings specified in this section are valid until an application is shut down.

•Specifying [Yes] for [Binding Margin] moves a printing area vertically or horizontally (for ensuring binding margin). For specifying margin in consideration of a double-page spread printing on application, specify [No] for [Binding Margin].

48