Installation and Configuration (Windows NT 4.0)

Ports Tab

Printer Section

Print to the following port(s)

Displays a list of available ports for printing (Port), their status (Description) and printers that are connected to these ports (Printer).

Add Port...

/

Delete Port...

button

Adds/deletes a new port or a new network port.

Configure Port...

button

Configures the selected port. In case of a parallel port, Transmission Retry should be specified.

Enable bidirectional support

On a printer, this setting enables reception of configuration data and status data from computer. Be sure to check this checkbox when installing status monitor (See page140 ). Printing may be disabled without checking on the checkbox.

Enable printer pooling

Printer spool allows outputting data from one logical printer to two or more printers. With printer spool enabled, a transmitted printing job is output to the first printer that allows printing.

NOTE

• Specify time (seconds) waiting for the printer to be ready for printing. If a printer is not

 

ready for printing after the specified time has elapsed, an error message is displayed.

If a timeout error occurs frequently upon printing a large size document, specify a larger value here.

37

Page 37
Image 37
Panasonic DP-3000, DP-2000 Ports Tab, Print to the following ports, Enable bidirectional support, Enable printer pooling