
Installation and Configuration (Windows 95/98/Me)
Spool Settings... button
Specify the method of sending (spool) documents from the program to the printer.
Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time before placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some application software.
1)Printing result is different from the screen display.
2)Printing requires excessive time.
Enable bidirectional support
Be sure to check the check box for "Enable bidirectional support" when installing the status monitor (See page 14032 ). Printing may be disabled without checking it.
Port Settings... button
Modifies printer port settings.
Printer Section
19