Panasonic DP-2000, DP-3000 manual Adjust the gamma strength of colors of printing image

Installation and Configuration (Windows 2000)

■Device Settings Tab

Halftone Setup...

button

Select the method of expressing device halftone (printer-specific halftone). Select the settings according to printing data and preference.

•Halftone Pattern

Select the size of pixels to be used for halftone.

Selecting larger size pixels results in a rough image, which is suitable for printing of wider area. Enhanced patterns, which allow printing an image of higher resolution using a same number of pixels, may cause random lines or patterns and moire.

•Device Gamma

Adjust the gamma (strength of colors) of printing image.

•Pixel Diameter

Adjust the density of a printing image. Specify the size of pixels by moving the slide bar. One of the two methods, specifying pixel size by inch or by ratio to the printer resolution (in per cent), is selectable.

•Luminance (CIE Y)

Adjust the luminance of a printing image.

64