Panasonic KX-TG5240AL operating instructions Making Intercom Calls, Press HOLD/INTERCOM

TG5240AL.fm Page 49 Friday, June 11, 2004 5:22 PM

Intercom

Intercom calls can be made between a handset and the base unit, and between two handsets (when the system has two or more handsets, p. 3). You can page all handsets at once from the base unit, and announce the page to all handsets (Voice Paging, p. 51).

Page the desired unit(s) by entering the extension number, shown in the top right of each handset’s display. The base unit’s extension number is 0.

Making Intercom Calls

From Handset

1	Press [HOLD/INTERCOM].
			Press extension#
			to call
			1-4=Handset
			0=Base
2	To page the base unit, press [0].	Ex. Calling Base unit
	To page another handset, press its extension		Calling Base
	number ([1] to [4]).
	• The paged unit will ring for 1 minute.	Ex. Calling Handset 2
	• To stop paging, press [OFF].		Calling HS[2]
3	When the paged party answers, start talking.		Ex. Intercom between
	• You can switch to the speaker by pressing [s].		Handset 1 & Base unit
			Intercom
	C
	To switch back to the receiver, press [ ].		00-00-05
			D01
4	To disconnect the intercom, press [OFF].

From Base Unit

Using this feature, you can also locate a misplaced handset.

1Press [LOCATOR/INTERCOM/TRANSFER].

•The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.

2To page all handsets, press [0].

To page a specified handset, press its extension number [1] () to [4] ( ).

•The handset(s) will ring for 1 minute.

•To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER].

3When the paged party answers, talk into the MIC.

4To disconnect the intercom, press [SP-PHONE]or [LOCATOR/

INTERCOM/TRANSFER].

•The indicator lights go out.

Telephone System

49