TG5240AL.fm Page 57 Friday, June 11, 2004 5:22 PM

Room Monitor

To monitor with Handset

The unit to be monitored must not be in use and the handset to be monitored must be off the base unit.

1Press [HOLD/INTERCOM], then press the soft key (MONITOR ).

2To call the base unit, press [0].

To call another handset, press its extension number ([1] to [4]).

To monitor from the speaker, press [s]. If the handset is placed on the base unit, monitoring will be stopped. Accessory handset users (p. 3) can place the handset on the charger and continue monitoring. To switch back to the receiver, press [C].

Press extension# for room monitor 1-4=Handset 0=Base

Room monitor 00-00-05 D01

Telephone

3 To end monitoring, press [OFF].

The monitored user can stop being monitored by:

— on the handset, press [OFF] or place the handset on the base unit.

— on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or [SP-PHONE].

Room monitor” is also displayed on the monitored handset.

While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/ TRANSFER indicator light flashes and the SP-PHONE indicator lights.

To monitor with Base Unit

The handset to be monitored must not be in use and off the base unit.

1Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE].

The LOCATOR/INTERCOM/TRANSFER indicator flashes.

2To call the handset, press its extension number [1] () to [4] ( ).

3To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or [SP-PHONE].

The indicator light goes out.

If the Room Monitor feature of the destination handset is off or the handset is on the base unit, busy tones will sound.

System

57

Page 57
Image 57
Panasonic KX-TG5240AL Room Monitor, To monitor with Handset, To monitor with Base Unit, To end monitoring, press OFF