Panasonic KX-TG5240AL Mailbox Features Setting the Mailbox Password for Mailbox 2, Set mailbox2&3

TG5240AL.fm Page 65 Friday, June 11, 2004 5:22 PM

Mailbox Features

Setting the Mailbox Password (for Mailbox 2 and 3)

Handset

You can use Mailbox 2 or 3 as personal mailboxes. To prevent unauthorized people from accessing your mailbox and listening to your messages, assign a

2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code (p. 74) must be unique. Once a password is assigned to Mailbox 2 or 3, no one can listen to messages without entering the password.

1Press [MENU].

2	Scroll to “Initial setting” by pressing
							Initial setting
	[d] or [B], then press the soft key (				).
				SELECT
3	Press the soft key (		) at “Set
		SELECT					Set answering
	answering”.
4	Scroll to “Set mailbox2&3” by pressing
							Set mailbox2&3
	[d] or [B], then press the soft key (				).
				SELECT
5	Select the mailbox by pressing [B] (Mailbox
							Set password
	2) or [d] (Mailbox 3).
							^=Mailbox2
							V=Mailbox3
6	Enter a 2-digit password (00–99).					Ex. Entered 22.
	• If you entered the wrong password, re-enter the						Set password
	correct one.						Mailbox2 :22

7Press the soft key ( SAVE ).

•If the handset beeps 3 times, you entered the same password as the other mailbox or the remote code (p. 74), or you entered a one-digit password. Start again from step 6 and select another password.

8Press [OFF].

To confirm the password, repeat steps 1 to 5.

•The password is displayed. When finished, press [OFF].

To erase the password

Press the soft key ( CLEAR ) in step 6, press the soft key ( SAVE ), and press [OFF].

•You can access the mailbox without entering the password.

Telephone System Answering System

65