Panasonic KX-TG5240AL operating instructions Troubleshooting

TG5240AL.fm Page 89 Friday, June 11, 2004 5:22 PM

Troubleshooting

Problem	Cause & Remedy
While programming or	• A call is coming in. To answer the call, press
searching, the handset or base	[C], [s] or [SP-PHONE]. Start again from
unit starts to ring and the	the beginning after hanging up.
program/search stops.

You cannot make an intercom/ • If more than one other user is using the

outside call.handset and/or base unit, you may not be able to make a call. Try again later.

•Your handset is in remote operation mode (p. 68). Exit by pressing [OFF].

•The handset you called is too far from the base unit.

•You cannot make an outside call when the dial lock is turned on. To turn the mode off, see page 63.

•Set the dialling mode to “Tone” (p. 23).

You cannot redial.• If the last number dialled was more than 48 digits long, the number will not be redialled correctly.

•The [REDIAL/PAUSE] button on the base unit functions as either redial or pause. It will redial the last number dialled if pressed before dialling any digits (p. 32). If another number has been dialled first, it will operate as a pause button (p. 58).

•You cannot redial when the dial lock is turned on. To turn the mode off, see page 63.

Telephone System Answering System Useful Information

89