Panasonic KX-TG5240AL operating instructions Denied, Dial locked

TG5240AL.fm Page 87 Friday, June 11, 2004 5:22 PM

If the Following Appear on Your Display...

Display message	Cause & Remedy
Denied	• The Room Monitor feature is turned off on the
	destination handset or base unit and cannot be
	monitored (p. 56).
	• The called handset was on the base unit. The
Save error	handset must be off the base unit to be monitored.
	the dial lock. Enter the correct password.
Dial locked	• The entered password was wrong in programming
	lock off (p. 63).
	• The dial lock is turned on. If necessary, turn the dial
Invalid.	• The handset you tried to call has not been registered
Please register	to the base unit. Register the handset (p. 84, steps 5
to the base unit	and 6).
Error!!	• 4 handsets have already been registered to the base
4 handsets have	unit. To cancel a handset’s registration, see page 83.
already been	• You may have registered one of your handsets to
registered.	another base unit without deleting its registration to
	this base unit. Erase the handset’s registration from
	the base unit.
	For the KX-TG5240AL base unit:
	(1) Press and hold [LOCATOR/INTERCOM/
	TRANSFER] for 3 seconds, and
	(2) Press and hold the handset number [1] ( ) to [4]
	( ) that you do not want for 5 seconds. A long beep
	sounds, then the handset number is erased.

Telephone System Answering System Useful Information

87