Panasonic KX-TG5240AL Tone, Programmable Settings Line Mode Handset, Dialling Mode Handset

TG5240AL.fm Page 23 Friday, June 11, 2004 5:22 PM

Programmable Settings

Line Mode Handset

The line mode is preset to “B” and generally should not be adjusted. If “ IN USE ” is not displayed on the handset properly, the line mode selection is incorrect. Set line mode to “A”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing
								Initial setting
	[d] or [B], then press the soft key (						).
					SELECT
3	Scroll to “Set tel line” by pressing [d] or
								Set tel line
	[B], then press the soft key (			).
		SELECT
4	Scroll to “Set line mode” by pressing [d]
								Set line mode
	or [B], then press the soft key (					).
			SELECT
5	Select “A” or “B” by pressing [d] or [B].
								Set line mode
								:B

6Press the soft key ( SAVE ), then press [OFF].

Dialling Mode Handset

If the unit cannot make an outside call, the dialling mode may be incorrect. Set the dialling mode to “Tone”.

Preparation

1Press [MENU].

2	Scroll to “Initial setting” by pressing
								Initial setting
	[d] or [B], then press the soft key (						).
						SELECT
3	Scroll to “Set tel line” by pressing [d] or
								Set tel line
	[B], then press the soft key (				).
				SELECT
4	Press the soft key (		) at “Set dial
		SELECT						Set dial mode
	mode”.
5	Select “Tone” by pressing [d] or [B].
								Set dial mode
								:Tone

6Press the soft key ( SAVE ), then press [OFF].

23