Panasonic R410A Specifications, When installing multiple remote controllers, Setting method

1. Specifications

7-18. Wiring System Diagram for Multiple Remote Controllers

When installing multiple remote controllers

This multiple system is used for operating the unit(s) at different positions. (A maximum of 2 signal receiving units can be installed.)

Setting method

To execute this control, make the setting according to the following procedure.

(1)Of the two installed signal receiving units, make one the main signal receiving unit (factory-shipped state).

(2)On the other signal receiving unit, change the address connector on the PCB from main to sub position.

In this state, it functions as a sub-signal receiving unit.

1 Basic wiring diagram

CAUTION

Carry out the wiring correctly (incorrect wiring will damage the equipment).

Signal receiving unit

(main)

1 2

(sub)

(Option)

1 2

To operate 1 indoor unit with 2 signal receiving units set at different locations.

Remote control				Connection wiring
cable terminal		1	2
board
	Indoor unit
Earth

1-112